Thermographic Inspection

Thermography is a method in which the temperature is mapped. Using a thermographic camera (IR) temperature differences are identified. Based on an analysis of these temperature differences can be worked to a conclusion. Partly thermography makes it possible to "below" the surface of a material compared to watch. It is obviously not a material fact or by looking, but the accurate measurement of the differences in surface temperature is possible a picture of what is under a surface play.

Thermography is widely used in cavity wall insulation and control or detection of fluid leaks or internal condensation. Damaged or missing insulation causes heat leaks in pipes or structures which may lead to unnecessary expense. Isolation is a good thing. But it is important to know which structural interventions be the most effective. These unnecessary and often costly arrangements are avoided. Using thermography can accurately indicate the places where heat loss or the places called cold bridges and air leaks are present or may arise. Thermography is in isolation issues often combined with other techniques such as air density measurement used.

Locating Frame Health’s risk (fungus)

Provides a good insulation with proper design a more favorable energy. But if you feel the strong wind and draft, then usually involve an air leak in the structure. Such leakage means heat or cold loss. In winter heating costs by more such homes and offices. In the summer cooling costs by more such offices and cooling companies.

In existing homes, this inspection method may be used to locate rising damp, cold bridges, floor heating, heat, condensation, drafts, damaged or missing insulation and heat leaks in structures or pipes, insulation leakage, various moisture problems, air leaks, smell leaks etc. This inspection method is applicable to many visually observable defects using thermography was 'visible' to be made. It should, however, there are differences in temperatures for this inspection technique to apply in other cases, a video microscope inspection a possible solution.

Mechanical engineering

Mechanical engineering and plant maintenance thermography as a diagnostic tool is perfect for early to conclude that something is wrong with these crucial elements of the factory / plant. A faulty bearing, inadequate lubrication or bad coils soon came an elevated temperature.

Pipes and Fittings

Pipes and fittings are subject to all kinds of wear. Thermography can be identified potential problems. This can cut costs by minimizing the unplanned activities and the timely availability of spare parts.